Gerber Profile SampleMaking Option

Maximize your Profile™ Productivity!

The most versatile system in the industry.
Adds Samplemaking to its list of attributes.
The Gerber Profile Samplemaking Option allows you to crease and cut sample boxes, or cut a variety of materials for short production runs providing an even greater return on your investment.

Specifications

	Tool Types	Creasing Wheel, 2 Point
		Creasing Wheel, 3 Point
		Creasing Wheel, 4 Point
		Corrugated Creasing Tool
		Swivel Knife
	Knife Blade Types
	(Solid carbide)	30 degrees, maximum depth of cut per pass 0.14 inches
		45 degrees, maximum depth of cut per pass 0.25 inches
		55 degrees, maximum depth of cut per pass 0.35 inches
	Active Cutting Area
		53.25” x 53.75” (1353 mm x 1365 mm) {Profile 404}
		53.25” x 101.75” (1353 mm x 2584 mm) {Profile 408}
	Maximum material width
		59” (1500 mm)
	Addressable Resolution
		0.001” (.025 mm)
	Maximum Positioning Rate*
		1300 in/min (550 mm/sec) {Profile 408}
		1400 in/min (593 mm/sec) {Profile 404}
	Cutting Speed*
		6-600 in/min (2.54 – 254 mm/sec) max speed depending on tool and material
	Acceleration
		max. .25g
	Material Clearance
		4.4” (110 mm)
	Software
		DieWorks, and G-code format
	Electronic Control
		Service friendly, exchangeable electronic box, 3-axis control X, Y and Z
	Keyboard
		User friendly operating panel with 3-line LCD display, multi-lingual, Integrated diagnostic function
	Safety
		CE and ETL approved
	Operating Temperature
		50 – 90°F (10 – 32°C)
	Operating Humidity
		20 – 90% RH, non-condensing
	Air Requirements
		110psi minimum at 10 cfm, clean dry air

*At nominal power

Please refer to the Profile page for more detail about the Profile Die Tool Production System.